MIX CHALLENGE - MC36 September 2017 - Winners announced

[Waleed Morris]

Thank you Adam for evaluation , Mister Fox as well for keep this competition a live .
I'll upload My final master soon , hope you like it , good luck all participates.

[Mister Fox]

I asked adamfiregate to get back in the thread and make clear what minor fixes are needed for the Round2 participants.
Sorry for the inconvenience, but please be patient.


@Wizoo:
Maybe "final master" is wrongly worded. But maybe "final edit". Mastering is not the concept of this challenge.

[Waleed Morris]

I asked adamfiregate to get back in the thread and make clear what minor fixes are needed for the Round2 participants.
Sorry for the inconvenience, but please be patient.


@Wizoo:
Maybe "final master" is wrongly worded. But maybe "final edit". Mastering is not the concept of this challenge.

Thank you for clarification .. i used to say final master after mixing ok i be waiting .

[adamfiregate]

Hi Everyone!

Sorry for my part about forgetting writing down the improvement tips.

Here they are:

Kevin Gobin
Please try to give the bass 1-2 dB boost and maybe with a bit of fattening with EQ around 150-200 Hz broad boost.

Wizzo
The kick could be amplified with 1-2 dB. The breakdown synth pad can be reverbed moderately and please try to soften the volume 2-3 dB.

Dodgingrain
Please enhance the panning of the hats on the one side to be more symmetrical or rhitmically pleasing to the ear. Avoid to be one sided.

CoiledEar
Please create a louder track, at least 3-4 dB than the actual one. Remove the fx from the ride and please use a more transparent sound similar to the original. The ride should be more dry. The vocal could be 2-3 dB louder.

SRMIX
Please add 2-3 dB loudness to the bass track. If you could do, please use more EQ cuts on all channels to clean up the mix. To have more separation.

Dwic
Please add 1-2 dB to the kick loudness. Please lower the decay or dry wet on the reverb of snare.

Thanks !!
Adam

[Waleed Morris]

Wizzo
The kick could be amplified with 1-2 dB. The breakdown synth pad can be reverbed moderately and please try to soften the volume 2-3 dB.

Hello Adam , everyone .
Done and I hope you like it .

Wave file download link Here
Mp3 file download link Here
Good luck to all .

Cheers !

[Dodgingrain]

Hey all,
mp3: https://1drv.ms/u/s!AqpB-RLndYJriPslIVVgReCUhDYvVg

wav: https://1drv.ms/u/s!AqpB-RLndYJriPsmOJGR-mJATFBoBg

I centered the hats, made some small adjustments to the drum levels, added some filter sweeping to the bass and enhanced the stereo image of the bass.

Thanks,

[kevin gobin]

Hi everybody!


https://soundcloud.com/kevin-gobin/mc03 ... bin-r2-mp3

https://soundcloud.com/kevin-gobin/mc03 ... n-gobin-r2 (FLAC)


Adam I've done exactly what you asked about the bass: 250hz boost, 2dB more level wise.


See you soon!

[Coiled_Ear]

Hi! Here is my corrections. Cheers

MP3 - https://www.dropbox.com/s/jaz7i95lpj33l ... 2.mp3?dl=0
WAV - https://www.dropbox.com/s/gcd79p1gqlttr ... 2.wav?dl=0

[Mister Fox]

A friendly reminder:
Including today, 2 days left to submit your edit for Mix Round 2

[SRMix]

here are my correction for the round 2

wav - https://mega.nz/#!4zQ3BTRK!IVop6WIR9zUF ... CzkEZE8JiM

mp3 - https://mega.nz/#!0rpi3BaK!BQsKg75SthGG ... saKfHxZTYg