Re: MIX CHALLENGE - MC098 June 2024 - Submissions until 21-JUN-2024 23:59 UTC+2/CEST
Posted: Wed Jun 12, 2024 10:59 CEST
Hello,
thanks to Arnwyn for providing this track.
Here is my mix:
https://drive.google.com/file/d/187_t98 ... sp=sharing
This is what I did:
DRUM BUS:
SSL G Bus > StuderA800 > Pultec
sticks > compressor
hats > EQ
tom bus > compressor
BASS:
Softube Bass Amp Room 8x10 > compressor > LA-2A > PSP E27 > linear Eq
PIANO:
Oxide Tape > Fairchild 670 > EQ
GUITAR (I used the original version):
Logic Amp Designer > 1176 > Fix Phaser > EQ
LEAD VOX (I used LVox2):
Neve 1073 > 1176 > LA-2A - De-Esser > EQ
BG VOX BUS:
compressor > EQ
All instruments share the same reverb (Arturia Rev Plate 140), with the shortest decay time. I then created an instrument bus to glue the instruments with the Api 2500 and a ratio of 1,5:1 and the needle not moving. To create a little more room for the vocals I also used the TDR Nova as dynamic EQ with three bands @ 146 Hz, 400 Hz and 5,2 kHz with 4db of gain reduction.
The vocals have 2 different reverbs. The first one is Redverb 2 with a shorter decay (followed by a De-Esser to tame the sibilance), and the second one is Soundtoys Little Plate with a slightly longer tail. To get some depth the vocals were sent to a delay fx with half notes.
For the final touch I used the api 2500 with 1,5:1 ratio and a Pultec with a 1 db boost @ 1,5 kHz on the stereo output.
thanks to Arnwyn for providing this track.
Here is my mix:
https://drive.google.com/file/d/187_t98 ... sp=sharing
This is what I did:
DRUM BUS:
SSL G Bus > StuderA800 > Pultec
sticks > compressor
hats > EQ
tom bus > compressor
BASS:
Softube Bass Amp Room 8x10 > compressor > LA-2A > PSP E27 > linear Eq
PIANO:
Oxide Tape > Fairchild 670 > EQ
GUITAR (I used the original version):
Logic Amp Designer > 1176 > Fix Phaser > EQ
LEAD VOX (I used LVox2):
Neve 1073 > 1176 > LA-2A - De-Esser > EQ
BG VOX BUS:
compressor > EQ
All instruments share the same reverb (Arturia Rev Plate 140), with the shortest decay time. I then created an instrument bus to glue the instruments with the Api 2500 and a ratio of 1,5:1 and the needle not moving. To create a little more room for the vocals I also used the TDR Nova as dynamic EQ with three bands @ 146 Hz, 400 Hz and 5,2 kHz with 4db of gain reduction.
The vocals have 2 different reverbs. The first one is Redverb 2 with a shorter decay (followed by a De-Esser to tame the sibilance), and the second one is Soundtoys Little Plate with a slightly longer tail. To get some depth the vocals were sent to a delay fx with half notes.
For the final touch I used the api 2500 with 1,5:1 ratio and a Pultec with a 1 db boost @ 1,5 kHz on the stereo output.