My Mix:
https://drive.google.com/file/d/1NVRQLh ... sp=sharing
Hi my name is BubbieBeats, I am a 17 year old Engineer, Producer, Artist, and Pianist. I want to thank you guys for giving me the chance to be in the competition and here is my breakdown.
The first thing I did was load in the wav files and routed them to my start bus. This bus is what I use to balance out the mix, and use an eq and compressor (Pro Tools default) on all tracks to get a(n) gist of how I would like the mix to sound. The only thing on the sound aux is Waves Audio VU meter. The purpose for that is to keep all elements of the mix right at or under -0dB. After everything sounds good I will route each instrument to its designated aux.
Drums:
I first start with the Kick and the Clap & Snare: (Kick Bus: Kirchhoff EQ, ShadowHills Master Compressor, Black Box Analog-HQ, OneKnob Pumper, Rbass, and RCompressor; Clap & Snare Bus: Kirchhoff EQ, ShadowHills Master Compressor, Black Box Analog-HQ, Little Radiator, and RCompressor.) Both of these are routed to my aux titled 'Smack" which gives these instruments a little more transients and saturation.
Then I go to my Hats, which consist of the hi-Hat, and Open Hat (HATS: Kirchhoff EQ, Fresh Air, Little Radiator, and RCompressor.)
After this I go to my 808 Bus (BASS: Rbass, ShadowHilss Compressor, Black Box Analog-HQ, Kirchhoff EQ, BarkOfDog 2, and RCompressor, This bus also consist of an 808 parallel.)
After this I then go to my Drum Bus (EQ3 7 Bands, ShadowHills Master Compressor, L1 Limiter, bx_digitalV3, and SSL Comp
Instruments:
Chior (EQ-7, Kirchhoff EQ, RCompressor, TapeMellofi)
Piano (Manny EQ, BF-3A, Kirchhoff EQ)
Flute (Kirchhoff EQ)
Pad, Lead, and Pluck (Kirchhoff EQ)
Bells (Clean Bells and Bell Lows: SSL G3 Multiband) along with Kirchhoff EQ, RCompressor, and Magic7
All Transitions have just EQS and compression
After this the I go to my Instruments Bus (bx_console SSL 4000 G, Manny EQ, ShadowHills Master Compressor, Li Limiter, bx_digtalV3, SSL Comp)
The All of the sounds go to my ALL MUSIC Bus (D3 Compressor/limiter, L1 Limiter, Lo-Fi, AMEK EQ 250, S1 Imager, Kirchhoff EQ, SSL Comp, Maxim, EQ3 7 Band)
Vocals:
LEADS- (Hook: Black Box Analog-HQ, LA-2A, Neutron Elements 3, Kirchhoff EQ, C4, CLA Vocals, C6, Puigtec EQP1A, EQ3 7Band, DeEsser (Sends: Air Bus, SAT Bus, Plate bus, Delay 1/4, Vocal Par.) (VRSE A: Black Box Analog-HQ, LA-2A, Neutron Elements 3, Kirchhoff EQ, C4, CLA Vocals, Puigtec EQP1A, EQ3 7 Band, DeEsser (Sends: Air Bus, SAT Bus, Plate bus, Delay 1/4, Vocal Par.) (VRSE B: Black Box Analog-HQ, LA-2A, Neutron Elements 3, Kirchhoff EQ, C4, CLA Vocals, Puigtec EQP1A, DeEsser (Sends: Air Bus, SAT Bus, Plate bus, Delay 1/4, Vocal Par.) Then all of the Lead Vocals are routd to a Lead aux with (Kirchhoff EQ, Fresh Air, and DeEsser on it.
DOUBLES- (Black Box Analog-HQ, LA-2A, Neutron Elements 3, Kirchhoff EQ, C4, CLA Vocals, Puigtec EQP1A, EQ3 7 Band, DeEsser (Sends: Air Bus, SAT Bus, Hall Reverb bus, Slap Delay, Vocal Par.)
ADLIBS- (Black Box Analog-HQ, LA-2A, Neutron Elements 3, Kirchhoff EQ, C4, CLA Vocals, Puigtec EQP1A, EQ3 7 Band, DeEsser (Sends: Air Bus, SAT Bus, Reverb bus, Delay 1/2, Vocal Par.)
Then All elements are routed to my MIX BUS (SPL BIG, EQ3 7Band, Kirchhoff EQ, Puigtec EQP1A, Trim, maxim, ADAPTER A/B)
I mixed the song on Pro Tools
I used my Headphone (DT1990 Pros, and my monitors (Yamaha HS8)